کلیدواژهها
|
hydroxyapatite (HA), titania, nanocomposite coatings, electrophoretic deposition (EPD), biocompatibility
|
چکیده
|
Hydroxyapatite (HA)/titania nanocomposite coatings with varied compositions were fabricated by
electrophoretic deposition (EPD) method on titanium substrates. The EPD kinetics decreased more
prominently with time in case of suspensions with higher amount of titania nanoparticles. The
cracking induced by sintering decreased and finally completely disappeared by increasing the titania
content in the suspensions (
50 wt%). The adhesion strength of coatings also increased with titania
content in suspensions. Cell culture experiments showed that the coating deposited from the
suspension with 50 wt% of titania nanoparticles has the highest cell growth efficiency. Considering the
results obtained by microstructural (crack formation), adhesion and cell culture analysis, the coating
deposited from the suspension with 50 wt% of titania nanoparticles was regarded as the optimum.
The optimum coating showed high bioactivity and its surface covered completely with thick apatite
layer after soaking in simulated body fluid (SBF) for 1 week. The application of optimum coating on
the titanium substrate considerably decreased its corrosion rate in SBF.
|