مشخصات پژوهش

صفحه نخست /Experimental Study and 3D CFD ...
عنوان
Experimental Study and 3D CFD Analysis on the Optimization of Throttle Angle for a Convergent Vortex Tube
نوع پژوهش مقاله چاپ شده
کلیدواژه‌ها
convergent vortex tube, conical valve angle, injection pressure, slots number, optimization
چکیده
Seven adjustments of convergent-type Vortex Tube (VT) with different throttle angles were applied. The adjustments were made to analyze the influences of such angles on cold and hot temperature drops as well as flow structures inside the VTs. An experimental setup was designed, and tests were performed on different convergent VT configurations at injection pressures ranging from 0.45 to 0.65 MPa. The angles of the throttle valve were arranged between 30° to 90°, and the numbers of injection nozzles ranged between 2 and 6. Laboratory results indicated that the maximum hot and cold temperature drops ranged from 23.24 to 35 K and from 22.87 to 32.88 K, respectively, at four injection nozzles. Results also showed that temperature drop is a function of hot throttle valve angle with the maximum hot and cold temperature drops depending on the angle applied. We used graphs to demonstrate the changes in the cold and hot temperature drops with respect to hot throttle angle values. These values were interpreted and evaluated to determine the optimum angle, which was 60°. The CFD outputs agreed very well with the laboratory results. The proposed CFD results can help future researchers gain good insights into the complicated separation process taking place inside the VTs.
پژوهشگران سید احسان رفیعی (نفر اول)، محمدباقر محمدصادقی آزاد (نفر دوم)